THIS IS THE TEST SITE

Your Next Selections: |

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Dyna Stix STP is a Silane Terminated Polymer wood flooring adhesive designed for use on high moisture bare concrete slabs. This high strength adhesive contains NO isocyanates and no solvents. Each pail comes with a clip on trowel designed for the perfect application of adhesive to achieve sound reduction or moisture protection. This high strength, non-slump formula holds perfect trowel ridges and cleans up easily prior to cure.30855829XL Brands Dyna Stix STP 4 In 1 Wood Adhesive 4 Gal
Login for more information
Stix 6010 is formulated with high tri-polymer content for the installation of engineered and acrylic impregnated wood plank as well as finished and unfinished solid wood flooring over a variety of substrates. Do not install over perimeter bonded flooring or rubber flooring. Closely follow NWFA guidelines when installing solid wood flooring directly to concrete substrates.30855681XL Brands Stix 6010 Wood Flooring Adhesive 4 Gal
Login for more information
Taylor 2071 Tuff-Lok X-Link Wood Flooring Adhesive with Meta-Tec Technology, is a high solids, cross linking, AmideEster-Acrylate, resin-based adhesive formulated for the interior installation of dry-back parquet, engineered wood plank, acrylic impregnated plank, and pre-finished and unfinished solid wood flooring. It is solvent free, has a low VOC content, contains no hazardous chemicals as per OSHA Regulation CFR 1910.1200 and it is a nonflammable, low odor adhesive that meets all federal, state, and local governmental indoor air quality regulations. This specially formulated adhesive has good early strength buildup for immediate grab and gradually builds into a tenacious but resilient bond as the chemicals in the adhesive cross-link. Taylor 2071 can be used over association grade underlayment plywood, association grade particleboard underlayment, cork underlayments, existing well-bonded vinyl tile and sheet flooring, terrazzo, radiant heated subfloors where surface temperatures do not exceed 85 degrees F, and concrete.2071-1WF Taylor Tuff-Lok X-Link Wood Floor Adhesive - Gal
Login for more information
3M Hardwood Repair Kit71001487553M Hardwood Repair Kit
Login for more information
Bostik Climb is a one-component, easy gunning, non-sag adhesive that is specifically formulated for hardwood flooring, planks and blocks on interior walls and installation of stair tread caps. The Climb formula has superior green grab (grab strength while wet) and cures quickly to form a tenacious bond. Once cured, Climb remains tough yet flexible for extreme durability, helps reduce stair squeaking, and reduces the sound of footsteps on the stairs. This specialty formulation is also easy to clean off of flooring, prefinished tread caps and risers even after cure. Climb has 0% solvents and low odor.30854239Bostik Climb Hardwood Wall Plank & Tread Cap Adhesive - White 10oz
Login for more information
Bostik EFA+™ is an easy-to-trowel urethane adhesive and moisture control membrane. It provides a tough, flexible, tenacious bond to a variety of surfaces. Its elastomeric characteristics allow EFA+™ adhesive to move with the wood as it expands and contracts over the life of the floor. Bostik EFA+™ exhibits a long open time making installation easier and faster. This adhesive has low VOC’s and does not contain any water.30850811Bostik EFA+ Hardwood Adhesive & Moisture Control - 5 Gal
Login for more information
Bostik EzPoxy™ EzClean™ is a 100% Solids Epoxy Mortar & Grout with outstanding application and clean-up properties.Use with ceramic, quarry, porcelain, granite, slate, pre-cast terrazzo, dimensional and moisture sensitive stone tiles over properly prepared concrete, structurally sound, exterior grade plywood (interior/dry use only), cement backer board, Bostik GoldPlus™,  Ultra-Set®  Advanced,  Black-Top™  and  existing  ceramic tile.30850846Bostik Greenforce Hardwood Adhesive & Moisture Control - 28 oz
Login for more information
Bostik GreenForce® is a high performance hardwood flooring adhesive and moisture control membrane all in one. With Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technol.ogy, GreenForce® maintains the superior long term durability and moisture protection properties of high-end urethane hardwood floor adhesive, but it is easier to spread and clean off of prefinished flooring, even after full cure.30850844Bostik Greenforce Hardwood Adhesive & Moisture Control - 4 Gal
Login for more information
MVP4 Moisture Vapor Protection is a one-part, trowel applied, moisture cure urethane membrane designed to be used beneath glue-down installations of engineered, solid and bamboo hardwood flooring. This is designed to minimize moisture vapor transmission from the subfloor, create a noise reduction barrier over the substrate, and establish an anti-fracture membrane that can bridge cracks that can occur in the substrate prior to or after installation (up to 1/8").30850841Bostik MVP4 Moisture Vapor Protect, Anti-Fracture & Noise Reduc 5 Gal
Login for more information
Pro-MSP is a hardwood and bamboo adhesive and moisture control membrane all in one. This adhesive formulation maintains long term durability and moisture control properties, and it is easy to spread and clean off of prefinished flooring before and after cure. This adhesive has low VOC's (as measured per EPA Method 24) and does NOT contain any water. Pro-MSP in sausage packs is best for Glue-Assisted, Nail-Down flooring installations. This easy to clean and gun MS-Polymer adhesive is ideally suited to meet the needs of installers working with wide-plank flooring. Pro-MSP has elastomeric properties and is able to bond to a variety of substrates, making it the ideal adhesive for Glue-Assisted, Nail-Down installations.30617345Bostik Pro MSP Hardwood Adhesive Moisture Vapor Protect 20 oz
Login for more information
Pro-MSP is a hardwood and bamboo adhesive and moisture control membrane all in one. This adhesive formulation maintains long term durability and moisture control properties, and it is easy to spread and clean off of prefinished flooring before and after cure. This adhesive has low VOC's (as measured per EPA Method 24) and does NOT contain any water.30850809Bostik Pro MSP Hardwood Adhesive Moisture Vapor Protect 4 Gal
Login for more information
Bostik’s Pro-Cure is a professional grade, moisture-cure urethane adhesive for wood flooring; this adhesive does NOT contain any water. Pro-Cure may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications. Pro-Cure may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, OSB (underlayment grade), well-bonded ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.30850842Bostik Pro-Cure Hardwood Adhesive 4 Gal
Login for more information
Ultra-Set® SingleStep2™ is a high performance adhesive, moisture control, and sound reduction membrane all in one. Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technology used in this formulation maintains the superior long term durability, moisture control and sound abatement properties of high end urethane adhesives.30850854Bostik Ultra-Set SingleStep2 Adh Moisture Control & Sound Reduct 4 Gal
Login for more information
Bostik's Vapor-Lock is a high performance adhesive, moisture control, and sound reduction membrane all in one. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces, and it is not adversely affected by exposure to moisture, water or alkalinity. Vapor-Lock exhibits exceptional green grab or high tack immediately after troweling, making installation easier and more secure. This adhesive contains 1% recycled rubber material, has 0 VOC's (as calculated per SCAQMD Rule 1168) and does NOT contain any water. Vapor-Lock contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the cured adhesive.30850864Bostik Vapor Lock Hardwood Adhesive Moisture & Sound Control 4 Gal
Login for more information
Bostik's BEST is a high performance adhesive and moisture control membrane. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik's BEST high tacking formula exhibits exceptional green grab immediately after troweling, making installation easier and more secure. This adhesive has low VOC's (measured per EPA Method 24) and does NOT contain any water. Bostik's BEST contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive.30850117Bostiks Best Urethane Adhesive Moisture Vapor Control 10.1 oz
Login for more information
Bostik's BEST is a high performance adhesive and moisture control membrane. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik's BEST high tacking formula exhibits exceptional green grab immediately after troweling, making installation easier and more secure. This adhesive has low VOC's (measured per EPA Method 24) and does NOT contain any water. Bostik's BEST contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive.30850116Bostiks Best Urethane Adhesive Moisture Vapor Control 28 oz
Login for more information
Bostik's BEST is a high performance adhesive and moisture control membrane. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik's BEST high tacking formula exhibits exceptional green grab immediately after troweling, making installation easier and more secure. This adhesive has low VOC's (measured per EPA Method 24) and does NOT contain any water. Bostik's BEST contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive.30850825Bostiks Best Urethane Adhesive Moisture Vapor Control 5 Gal
Login for more information
KILZ ORIGINAL Primer is a powerful stain blocking formula that blocks most heavy interior stains including water, smoke, tannin, ink, pencil, felt marker, grease, and also seals pet, food and smoke odors. May be top coated with latex or oil-based paint. Use on: wood, drywall, wallpaper or masonry.613-7566Kilz Original - Gal
Login for more information
Millennium Series 2001 Floating Wood Floor Glue is formulated to install all wood floating floors. It is flexible enough to give and bend with the normal movement of floating floors without breaking the bond. 2001 provides an aggressive water resistant bond to the wood.M-2001/16 OZParabond #20011 Tongue And Groove Adhesive 16 Oz
Login for more information
Millennium Series 2009 is the ultimate engineered wood-flooring adhesive. It can also be used to install domestic species solids (i.e., oak, maple, hickory, ash etc.). It is formulated with a proprietary QUADPOLYMERIC formula for installing most wood flooring widths and thickness. MS 2009 is extremely user-friendly, easy to trowel, maintains very good open time and cleans up easily with Mineral Spirits.15018022Parabond Millennium Series 2009 Premium Wood Flooring Adhesive 4 Gal
Login for more information
Powerhold 7800 Urethane Wood Flooring Adhesive is a low solvent, low V.O.C., one component, moisture curing polyurethane adhesive. Designed for easy trowel-on application over concrete or wood substrates to install materials such  as solid and engineered wood flooring, parquet flooring, shorts, recycled rubber flooring, cork flooring and bamboo flooring (not strand woven).7800 3.5 GALLONPowerhold 7800 Urethane Wood Flooring Adhesive Moisture Cured 3.5 Gal
Login for more information
Powerhold 7800 Urethane Wood Flooring Adhesive is a low solvent, low V.O.C., one component, moisture curing polyurethane adhesive. Designed for easy trowel-on application over concrete or wood substrates to install materials such  as solid and engineered wood flooring, parquet flooring, shorts, recycled rubber flooring, cork flooring and bamboo flooring (not strand woven).15030178Powerhold 7800 Urethane Wood Flooring- Moisture Cured 5 Gal
Login for more information
Powerhold 7950 Hybrid is a urethane moisture barrier and wood flooring adhesive. Designed to install material such as: solid / engineered flooring, parquet flooring and bamboo flooring over concrete. Application of this product gives the moisture barrier and the wood flooring adhesive in one easy trowel on application.7950 3.5 GALLONPowerhold 7950 Urethane Moisture Barrier Adh 3.5 Gal (2 in 1 Adh)
Login for more information
Powerhold 7950 Hybrid is a urethane moisture barrier and wood flooring adhesive. Designed to install material such as: solid / engineered flooring, parquet flooring and bamboo flooring over concrete. Application of this product gives the moisture barrier and the wood flooring adhesive in one easy trowel on application.7950 5 GALLONPowerhold 7950 Urethane Moisture Barrier Adh 5 Gal (2 in 1 Adh)
Login for more information
Type II - excellent water resistance. Strong initial tack - fast set. Sands easily without softening. Weatherproof - ideal for exterior applications. Water clean-up. Resists solvents, heat & water. SIZE: 16 Oz.500-4Titebond II Wood Adhesive - 16 Oz
Login for more information

Showing 1 - 25 of 29 Results

You have 0 pending changes for your basket
  • Connect With Us:

FSC Approved

Copyright © 2018 Professional Flooring Supply.  All rights reserved.