THIS IS THE TEST SITE

Your Next Selections: |

Carpet Tools & Accessories

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Drive the 5000 series staples, including 5010D divergent point. Easy bottom loading for a quick reload of staples. Easy clearing of jams. Ergonomic handle for installer comfort.PHX-PP7500Traxx Pad Pro 75 Hammer Tacker
Login for more information
6" Everclean Heat Bond Iron Grooved Teflon Base10-286G6" Everclean Heat Bond Iron Grooved Teflon Base
Login for more information
Better Tools 4.75" Stair ToolBTS475Better Tools 4.75" Stair Tool
Login for more information
Better Tools Dual Seaming TractorBT400Better Tools Dual Seaming Tractor
Login for more information
Blish Mize 12X400 Painter Plastic .31 Mil Visqueen606-6344Blish Mize 12X400 Painter Plastic .31 Mil Visqueen
Login for more information
CNS Slap StaplerSLAP-T11CNS Slap Stapler
Login for more information
This popular and proven Rapid staple hammer has a simple design with only four moving parts. Clearing jams is easy by releasing a quick-access pin to remove the magazine and expose the staple channel. Includes contoured ergonomic soft plastic grip. Uses Crain No. 141C 3/8" leg chisel point or No. 142D 3/8" leg divergent point staples.130Crain 130 - Staple Hammer
Login for more information
Crain 140 - Heavy Duty Hammer Tacker140Crain 140 - Heavy Duty Hammer Tacker
Login for more information
Crain 147 Edge Binding Stapler147Crain 147 Edge Binding Stapler
Login for more information
Crain 148 - Edge Binding Staples148Crain 148 - Edge Binding Staples
Login for more information
Stair tools are used with a mallet to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. This tool is a full four inches wide to tuck more carpet each time it is malleted. The soft cushion grip absorbs vibration and is textured for good grip. The outer edges are angled back, forming an offset that protects walls, and permits the corner of the tool to get all the way into an inside corner area for tucking. Smooth tapered blade will not snag or cut the carpet.152BCrain 152B - Cushion Stair Tool Carded
Login for more information
Stair tools are used with a mallet to tuck carpet into the corner of stair treads, as well as to tuck carpet at the wall between the base board and the tackless strip. This tool is a full four inches wide to tuck more carpet each time it is malleted. The soft cushion grip absorbs vibration and is textured for good grip. The outer edges are angled back, forming an offset that protects walls, and permits the corner of the tool to get all the way into an inside corner area for tucking. Smooth tapered blade will not snag or cut the carpet. Net weight: 1 lb.152BCrain 152B - Cushion Stair Tool, Carded
Login for more information
Crain 154 - Narrow Stair Tool154Crain 154 - Narrow Stair Tool
Login for more information
Replacement part for Crain 545 Multi-Undercut Saw1545-KCrain 1545K Brush Set 2
Login for more information
The bent blade of this stair tool is helpful when it is necessary to tuck carpet under toe spaces. It is also helpful for tucking carpet underneath Z-bar and under heat registers. The smooth tapered blade will not snag or cut the carpet. The four inch blade tucks a wide section of carpet each time it is malleted. Forged from an impact-resistant steel alloy, and nickel plated. Net weight: 1 lb.155Crain 155 - Bent Stair Tool
Login for more information
The notched carpet spreader is made from flexible steel. It can be used to press and hold the carpet in the gully at the tack strip while the stretch is released. This causes the carpet's backing to set better on the pins of the tack strip. The blade of this spreader is flexible enough that it can also be used in tight spaces as a glue spreading trowel. Notches are 1/16 inch x 1/16 inch "U"-type. The blue plastic handle is ergonomically contoured. Blade width: 12 inches. Net weight: 8 oz.161Crain 161- Carpet Spreader
Login for more information
The plain carpet spreader is made with thicker 16 gauge plated steel without notches. It holds the carpet on the tack strip as the stretch is released for better setting of the pins into the carpet's backing. With no notches, the tool makes a better tucking tool. Push it down the wall with pressure on the handle, and it tucks the carpet without catching yarns. The thicker blade does not bend under load. The black plastic handle is ergonomically contoured. Blade width: 10 inches. Net weight: 8 oz.162Crain 162 - Carpet Spreader Plain
Login for more information
This long-nosed hammering tool extends beneath toe-spaces and other low clearance areas to drive tack strip nails and other nails into the subfloor. The hammering tip is magnetized to temporarily hold a nail in position. The forged alloy steel body includes a bonded rubber-like handle that reduces impact vibration from the hammer being transmitted to the hand and wrist. Net weight: 5 lbs.166Crain 166 - Magnetic Drive Bar
Login for more information
This tool has a precision magnetic tip that can hold nails in position so they can be driven into areas where it would be difficult with fingers only. Works well driving hard to hold stubby nails into the tack strip when fastening strip to concrete, for example. The tool's body is made from a 5 1/2" long stainless steel body with a powerful magnetic insert on one end and the hammering head on the other.172Crain 172 - Magnetic Tack Holder
Login for more information
This tool cuts a three inch diameter circle for removing stained areas from a carpet. Four blades mount on the body to make clean cuts. The sharp central pivot pin is spring-loaded to adjust automatically to different thicknesses of carpet. The solid aluminum body includes finger contours for gripping. Includes plastic cap to protect the body and pin in storage. Blades: 1174-A174Crain 174 - Cookie Cutter Instant Re-tool
Login for more information
These seam squeezers are made with a powerful torsion spring and two grippers that are oriented inwardly to pull seams together. Sold in a set of two. They are helpful on glue-down carpet installations to pull and hold seams together. Pulling force can be controlled with the amount of hand pressure. The spring arms are vinyl-coated for comfort. Nap grips are replaceable: Part No. 1180-A. Net weight: 3 lb./set180Crain 180 - Seam Squeezer Set
Login for more information
Our big loop nap shears have offset handles with oversize loops for users with large fingers. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. The right side loop accommodates two fingers for ease of activation of the top blade. Handles are vinyl-coated for ease of grip. Net weight: 6 oz.187Crain 187 Big Loop Nap Shears
Login for more information
These duckbill nap shears have offset handles with smaller one inch loops for precision control. The offset handles are easily held parallel with the floor for trimming off the tops of carpet tufts. The flat duckbill rides on top of the carpet to position the top blade at the proper height. Handles are vinyl-coated for ease of grip.190Crain 190 Napping Shears
Login for more information
The turning tool has a bent leg for tucking carpet under "Z" Bar. Push the point to the back of the "Z" bar, then run the point down the length. The tool will tuck as it moves along the "Z" bar. The angled leg offsets the handle from the floor to keep knuckles from rubbing on the carpet. The tool is also useful for light carpet stretching in cramped areas, such as around toilets. Insert the sharp high carbon steel point into the tackless strip and lift to stretch. Net weight: 3 oz192Crain 192 Turning Tool
Login for more information
The sharp, high-carbon steel point penetrates the carpet's backing for fast removal from the tack strip. It can also be used for light carpet stretching in tight areas, such as around toilets. Press the point into the tack strip and lift to stretch the carpet. The point has an opposite flat end seated in the top of the hard plastic handle for hammering when necessary. Handle is rounded to fit the palm comfortably. Net weight: 3 oz.195Crain 195 Carpet Awl
Login for more information

Showing 26 - 50 of 272 Results

  • Connect With Us:

FSC Approved

Copyright © 2022 Professional Flooring Supply.  All rights reserved.