THIS IS THE TEST SITE

Your Next Selections: |

Mitigation Solutions

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Accelerator for use with UZIN PE 460 two component epoxy resin moisture vapor retarder. Used to accelerate cure time of epoxy and allow for fast track installation of floor coverings. For interior or exterior use.33155Uzin Epoxy Accelerator 2 Comp
Login for more information
1-component surface strengthener, primer and moisture vapor retarder. Its fast drying polyurethane formula acts as a surface strengthener and consolidator on absorbent and non-absorbent substrates.79281Uzin PE 414 Turbo Rapid Prime Moisture Vapor Retarder 2.6 Gal
Login for more information
A two component epoxy resin moisture vapor retarder for concrete substrates with high residual moisture. UZIN PE 460 can also be used as a surface hardener for absorbent substrates and as a bonding agent. For interior and exterior use.73030Uzin PE 460 Moisture Vapor Retarder Epoxy 2 Comp 2.5 Gal
Login for more information
A two component epoxy resin moisture vapor retarder for concrete substrates with high residual moisture. UZIN PE 460 can also be used as a surface hardener for absorbent substrates and as a bonding agent. For interior and exterior use.73031Uzin PE 460 Moisture Vapor Retarder Epoxy 2 Comp Gal
Login for more information
UZIN RR 185 loose laid sheet membrane is the ideal choice for fast, easy installation of various finish floor coverings. Unlike traditional liquid applied membranes, UZIN RR 185 does not require a mechanical concrete profile prior to its installation. With 100 % RH resistance, it can receive floor coverings in a greatly reduced time to that of wet applied mitigation products. This uncoupling sheet can be applied over contaminated and mixed substrates, making it perfect for both refurbishment and preservation projects. Existing substrates / coverings can easily be overlaid with new floor finishes, their subsequent replacement requiring mimimal effort or disruption. For interior and exterior use.9378Uzin RR 185 Uncoupling Sheet Moisture Mitigation Membrane 532.8 Sf
Login for more information
Driseal 95 is an aqueous acrylic polymer that can be used on porous concrete substrates as a penetrating and film-forming sealer to protect against moisture readings up to 95% in-situ Relative Humidity (RH) and pH of 11.0. Driseal is a non-flammable, white emulsion which dries to a clear film that is alkali and water-resistant.30855835XL Brands DriSeal 95/One Coat Vapor Seal 4 Gal
Login for more information
LiquiDam is a low viscosity, high penetrating, two-part 100% solids epoxy. It is specially formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000sf  per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. It is designed to reduce the MVER to less than 3 lbs. per 1,000 sf per 24 hours (0.015 kg/m2 per 24 hours). LiquiDam is colored blue for visual assurance of coverage during the application process. Only one coat required to penetrate and fill voids and gaps to fully seal the substrate and quickly cures as soon as 4-5 hours to provide the benefit of same day installation. LiquiDam is a moisture vapor barrier for the installation of floor coverings, tile, stone and concrete toppings. Ideal for use with other TEC adhesive, patch, underlayment, leveler and mortar products.15036204TEC Liquidam Unit Part A & B 1 Gal
Login for more information
Traxxshield installation tapes have zero telegraphing when installed beneath the seam. Gives added MVER protection at the seam lineTSU-40200-DST4Traxx Traxxshield 99 Double Stick Tape 36 Yd Roll
Login for more information
Concrete must always be primed prior to installation. TraxxShield Primer is made for both porous and non-porous concrete surfaces.TSU-40200-P5Traxx Traxxshield 99 Primer 5 Gal
Login for more information
Concrete must always be primed prior to installation. TraxxShield Primer is made for both porous and non-porous concrete surfaces.TSU-40200-P4Traxx Traxxshield 99 Primer Gal
Login for more information
Traxx Traxxshield 99 Roll Moisture Barrier 40 Mil 200 Sf RollTSU-40200Traxx Traxxshield 99 Roll Moisture Barrier 40 Mil 200 Sf Roll
Login for more information
With this versatile wireless device, you're set for quick, accurate readings of relative humidity (RH) and temperature when using either the Rapid RH 4.0 EX or 5.0 systems. In fact, collecting important data from either your Rapid RH 4.0 EX or 5.0 Smart Sensor has never been easier! Just tap a Bluetooth Smart Reader, about the size of a USB flash drive, to the Smart Sensor.Then for a fast, easy-to-read display, send your data wirelessly to one of two convenient apps available for download to your mobile device. The DataMaster 4.0/5.0 app, when paired with the bluetooth smart reader, serves as a comprehensive data integrity and data recording app designed specifically for use with either Rapid RH 5.0 or 4.0 EX sensors. Available on the app store.860-R0030-001Wagner Rapd RH Bluetooth Smart Reader
Login for more information
Knowing the importance of Rapid RH assessment tools, masonry and concrete trade professionals rely on the TE-CX (SDS Plus) Imperial Masonry Drill Bit.713-R0000-001Wagner Rapid RH Drill Bit 3/4" Masonory Bit
Login for more information
The Cleaning Brush was designed specifically for removing concrete debris before installing the Rapid RH Smart Sensors.714-R0005-001Wagner Rapid RH Wire Brush
Login for more information
Easily extend the Rapid RH L6 Sensor sleeve for deeper hole depths. Each extension add 1/2" to the smart sensor sleeve. Use multiple extensions for deeper holes.712-R0015-001Wagner Smart Sensor Extension
Login for more information
The Rapid RH 4.0 EX Insertion Tool is newly designed to provide simpler, more ergonomic Smart Sensor insertion for RH testing in concrete slabs with the Rapid RH test method. The new Insertion Tool is a more robust and extraordinarily useful multipurpose insertion tool that allows installers to know when they have a correctly-sized, straight, uniformly round test holes. Multi-stepped and multipurpose, the new insertion tool completely syncs with the current model Easy Reader for complete compatibility with the Rapid RH 4.0 EX system712-R0025-001Wagner Smart Sensor Insertion Tool For 4.0 Sensor
Login for more information
Knowing and maintaining correct ambient conditions is critical in flooring installation and woodworking applications. The Wagner Meters TH-200 Pen-Style Thermo-Hygrometer is an ideal and convenient tool for flooring installers, woodworkers, and inspectors when critical temperature, relative humidity, and dew point information must be known. The pen-style design makes for easy carrying, and the 3-button controls are very simple-to-use.674-04196-003Wagner TH-200 Thermo Hygrometer
Login for more information
Wagner Wagner DataMaster & Bluetooth Reader - RH Meter880-R0034-001Wagner Wagner DataMaster & Bluetooth Reader - RH Meter
Login for more information
Taylor CACL2 Moisture Test Kit Value Pack 3 Kits Per Pack625.POP.VPTaylor CACL2 Moisture Test Kit Value Pack 3 Kits Per Pack
Login for more information
Taylor CACLl2 Moisture Test Kit Bulk (50)625B.00.00Taylor CACLl2 Moisture Test Kit Bulk (50)
Login for more information
Taylor Calcium Chloride Test Kit Pop ASTM F1869 Moisture Vapor Test625.00.POPTaylor Calcium Chloride Test Kit Pop ASTM F1869 Moisture Vapor Test
Login for more information
No matter what the project, 100% PVC free Roppe Pinnacle rubber base is ideal for the job. Pinnacle is the professional choice, because this SBR rubber base is highly durable and extremely flexible, allowing for easy installation.25EXMMRoppe Excelsior Moisture Mitigator MM-100
Login for more information
*(2T) TREAD HAS A 2" TEAK BROWN ABRASIVE STRIP*  Roppe Hammered Design Stair Tread without Riser is PVC free and Red List chemical free.  Made in the USA, this tread meets FloorScore, NSF 332 Gold, and CHPS criteria.  Ribbed rubber inserts and custom strips can be added for extra traction or to aid the visually impaired. Treads fully comform with ASTM F-2169, Type TS. All Roppe Rubber Stair Treads are offered in the complete 70 color palette with coordinating rubber tile available. Roppe Rubber Stair Treads with Kevlar feature a 25-year warranty to help you create a design that looks beautiful for decades.  Fully conform to ASTM F2169, Type TS and meet FloorScore, NSF332 Platinum and CHPS Criteria. Free of Red List chemicals, PVC, phthalates and halogens.2T7899KP18699 Hammered Kevlar Tread w/o Riser 78" - Red (2T)
Login for more information
Tramex Concrete EncounterCME4Tramex Concrete Encounter
Login for more information
Tramex Hygro I Extra Long Retrieval ToolHIEXLTramex Hygro I Extra Long Retrieval Tool
Login for more information

Showing 1 - 25 of 79 Results

  • Connect With Us:

FSC Approved

Copyright © 2022 Professional Flooring Supply.  All rights reserved.