THIS IS THE TEST SITE

Professional Flooring Supply
  • Home
  • Supplies Solutions
Your Next Selections: |

Supplies List Solutions

|

Adhesives

|

Carpet & Resilient Metals

|

Setting Materials

|

Tackstrip

|

Underlayments

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Bostik PM™ Multi-Purpose Polymer-Modified Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimensional stone tiles. Use over properly prepared concrete; structurally-sound, exterior grade plywood (interior/dry use only); cementitious backer board; Bostik Ultra-Set® Advanced, Bostik Black-Top™, Bostik GoldPlus™ and existing, well-bonded vinyl composition tile (VCT) or ceramic tile.30850786Bostik PM Multi-Purpose Polymer-Modified Thin Set Mortar - 50 Lb -Gray
Login for more information
Bostik Porcelain-Mate™ is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone and dimensional stone tiles. Use over polyethylene uncoupling membranes and fleeced sheet membranes, properly prepared concrete, cement backer board, cured mortar beds, brick, cement block, and Bostik GoldPlus™.30850793Bostik Porcelain Mate Modified Thin Set Mortar 50 Lb - Gray
Login for more information
Bostik's Vapor-Lock is a high performance adhesive, moisture control, and sound reduction membrane all in one. Its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces, and it is not adversely affected by exposure to moisture, water or alkalinity. Vapor-Lock exhibits exceptional green grab or high tack immediately after troweling, making installation easier and more secure. This adhesive contains 1% recycled rubber material, has 0 VOC's (as calculated per SCAQMD Rule 1168) and does NOT contain any water. Vapor-Lock contains Bostik's BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the cured adhesive.30850864Bostik Vapor Lock Hardwood Adhesive Moisture & Sound Control 4 Gal
Login for more information
A low viscosity, high penetrating, two-part 100 % solids epoxy designed to reduce moisture vapor emission rates from 25 lbs. /1,000 ft2/24 hours and can be applied directly over green concrete (RH 100 % or lower). Delivers less than .1 permeability of water vapor through the membrane, exceeding the newly-released ASTM F3010-13 standard for moisture vapor barriers.15036206Chapco Defender A&B Moisture Vapor Barrier Gal Kit
Login for more information
A moderate multi-purpose adhesive formulated to spread easily and provide excellent green strength for carpet and ample open-time for felt/mineral backed vinyl installations.15035504Chapco Safe Set 155 Multi Purpose Adhesive 4 Gal
Login for more information
A high-solids, acrylic-based adhesive ideal for use with solid vinyl tile and solid vinyl plank materials. This user-friendly product has an extended open-time (up to 2 hours) to cover more area in a shorter timeframe. Up to 6 lbs. MVER/82% RH.15035519Chapco Safe Set 299 Premium Vinyl Tile Adhesive 4 Gal
Login for more information
210 is a premium, Calcium Aluminate based, interior, self leveling underlayment that can be used to create a smooth, flat or level surface prior to the installation of floor coverings. Its long working time, low shrinkage and superior leveling properties make it the ideal product for demanding applications on, above or below grade. Sealed with a suitable coating, 210 is also the perfect decorative topping when a natural concrete look is desired. Topical stains, dyes and surface treatments further expand the decorative possibilities.30615892CMP 210 Premium Calcium Aluminate Based Interior Self Level 50Lb
Login for more information
AS-100 is a premium interior / exterior acrylic primer designed for use with CMP's line of underlayment's and toppings. AS-100 can be used on a wide variety of substrates including concrete, wood, well bonded VCT, Epoxy, Gypsum underlayment, cutback and other adhesive residues not affected by water. AS-100 is quick drying and with a unique ability to bond to both porous and non-porous substrates.30855250CMP AS-100 Premium Acrylic Based Bonding Agent & Primer 5 Gal
Login for more information
AS-100 is a premium interior / exterior acrylic primer designed for use with CMP’s line of underlayment's and toppings. AS-100 can be used on a wide variety of substrates including concrete, wood, well bonded VCT, Epoxy, Gypsum underlayment, cutback and other adhesive residues not affected by water. AS-100 is quick drying and with a unique ability to bond to both porous and non-porous substrates.30619635CMP AS-100 Premium Acrylic Primer Gal
Login for more information
CR-90 is a high performance, quick turnaround, concrete resurfacer that only needs to be mixed with water and can be used for both horizontal and vertical applications. CR-90 is a cost effective durable answer to expensive concrete replacement. CR-90 can be applied by trowel, sponge float, squeegee or brush and can be broom finished. In addition it can be spray applied for knockdown and stencil applications or used as a thin stamp overlay. CR-90 is available in Sidewalk Gray or White and can be integrally colored or stained.30855245CMP CR-90 Grey Concrete Resurfacer 50 Lb
Login for more information
DASH PATCH is a fast setting gypsum based skimcoat used in preparation of finished floor coatings. DASH Patch can be used to smooth cracks, joints, or other imperfections in concrete, wood, vinyl, ceramic tile or other subfloor surfaces. DASH PATCH can also be used to repair walls and ceilings.30618996CMP Dash Patch 25 lb. bag
Login for more information
Grey Patch is a polymer modified, calcium aluminate, rapid setting, interior patching compound used to fill voids and smooth the surfaces of open concrete and approved wood underlayments and may be used without a primer or additive. Common floor coverings such as VCT and Carpet can be installed in as little as *1 hour. When used in the "Skim-Bond System", Grey Patch can be used on properly prepared burnished concrete, cutback & non water soluble adhesive residue, cement terrazzo, ceramic or quarry tile, single layer, fully bonded VCT and embossed, non-cushioned, residential, sheet vinyl or other non-porous surfaces.30615890CMP Grey Patch 25 lb. Bag
Login for more information
Level-1 is a cement based, interior, self leveling underlayment that can be used to create a smooth, flat or level surface prior to the installation of floor coverings. Its extended working time, low shrinkage and superior leveling properties make it the ideal product for renovation and new construction projects where next day flooring installations are not critical. Level-1 produces a hard durable surface that can be left open to normal construction traffic for up to one year before the installation of finished flooring and it can be feather-edged to meet existing transitions.30615866CMP Level 1 Cement Based Interior Self Leveling Underlay 50 Lb
Login for more information
LiquiTek is an advanced, gypsum based, self-smoothing or self-leveling underlayment used to resurface dry, interior, distressed substrates when shot-blasting or diamond grinding is not possible. It can be applied over gypsum underlayment, lightweight concrete, mud beds, structurally sound wood, asphalt, certain well bonded floor coverings, cutback and other non-water soluble adhesives with minimal surface preparation. LiquiTek's unique fiber formulation combines a super smooth surface with extremely fast hydration, allowing non-moisture sensitive installations to begin as soon as 4 hours, resilient and wood flooring in as little as 16 hours. LiquiTek is 3500 psi in only 4 hours & 7500 psi @ 28 days.30610570CMP LiquiTek Bag 46 lb
Login for more information
LockDown is a versatile,100% solids, epoxy resin system that can be used as a vapor suppression, broadcast priming and crack repair. LockDown is designed for use over existing concrete where the level of moisture emissions from the slab exceeds the maximum allowed by the manufacturer of the finished floor covering. It also can be used on new projects where schedules do not allow for freshly poured concrete to fully cure. Applied in just one coat at 300 ft² per KIT, LockDown will reduce unlimited MVER or up to 100% RH (per ASTM F-2170) to below 3 lbs. For applications that will receive CMP’s leveling compounds, AS-100 primer is required.30611420CMP Lockdown 100% Solids Vapor Suppression 2.5 Gal
Login for more information
LP1 is a premium, hybrid gypsum / cement based self leveling that can be installed from 1/4″ up to any thickness without extension. It is designed for use over distressed Gypsum subfloors, light weight concrete, mud beds, structurally sound wood, adhesive residue and it is ideal for use on radiant or in-floor heating systems. LP1 can also be used for certain "Low-Prep" applications where shot-blasting and mechanically cleaning substrates cannot be done. LP1 provides a strong durable substrate for floor coverings such as rubber, sheet vinyl and vinyl composition tile (VCT).30855231CMP LP1 BAG 50 LB
Login for more information
PolyBond is a water based, high solids, acrylic emulsion admixture and adhesion promoter specifically designed for use with CMP Engineered Cements. When exposed to moisture it will not re-emulsify making it ideal for both interior and exterior applications. PolyBond should be used as directed in CMP patching products, underlayments and concrete repair materials to improve the adhesion, tensile and flexural strengths when needed. The modified materials will also derive increased abrasion resistance, increased resistance to moisture, water, freeze / thaw and cracking.30855228CMP PolyBond Latex Admix - 1 Gal
Login for more information
PolyBond is a water based, high solids, acrylic emulsion admixture and adhesion promoter specifically designed for use with CMP Engineered Cements. When exposed to moisture it will not re-emulsify making it ideal for both interior and exterior applications. PolyBond should be used as directed in CMP patching products, underlayments and concrete repair materials to improve the adhesion, tensile and flexural strengths when needed. The modified materials will also derive increased abrasion resistance, increased resistance to moisture, water, freeze / thaw and cracking.30855227CMP PolyBond Latex Admix - 5 Gal
Login for more information
PourLite is a Calcium Aluminate based, interior, self leveling underlayment designed specifically for applications where the weight of conventional underlayments or concrete will exceed the allowable load. It is also ideal for fast track projects where the dry-time or application thickness needed for standard lightweight concrete is not available. PourLite can be used to create a flat or level floor and does not require the addition of lightweight beads or need to be capped with conventional material prior to the installation of finished floor covering.30855226CMP PourLite - Cement Based Self Leveling Underlayment (25 lbs)
Login for more information
PrepStar is a cement based, rapid drying, trowelable underlayment and skimcoat that is used to smooth interior subfloors prior to the installation of finished floor covering. PrepStar allows for the installation of many floor coverings in as little as 15 minutes. It can be applied over properly prepared concrete, wood, cement based terrazzo, vct, ceramic, quarry tile, cutback and non-water soluble adhesive residue, all without priming or the use of an additive.30616101CMP PrepStar Prem Trowelable Underlay & Skimcoat 10 Lb
Login for more information
RampStar is an interior, quick setting underlayment with excellent workability that makes screeding, ramping or patching fast and easy. RampStar can be used over concrete, terrazzo, ceramic or quarry tile, epoxy coatings, non-water soluble adhesive residue and approved wood subfloors. Installation of common floor coverings using water-based adhesives can proceed as soon as RampStar is hard enough to work on without damaging the surface. Moisture sensitive adhesives can proceed after 16 hours of application.30618683CMP RampStar Underlayment 50 Lb
Login for more information
Single face corrugated can be used for overwrapping, inner-wrapping, interleaving or as dunnage material. Provides excellent cushioning and protection during storage and transit. Protects your products from scratches, chips or breaks. Flexibility to conform to virtually any shape. B-Flute.48CORCorrugated Paper 48" x 250' Roll
Login for more information
Futura 1-3/8" Vinyl Insert Carpet Metal w/Pins Extender 12'415159Futura 1-3/8" Vinyl Insert Carpet Metal w/Pins Extender 12'
Login for more information
ORCON's original bonded oriented continuous strand (BCOS) scrim. An exceptionally low profiling tape for a wide range of conventional applications.ORT-9360Orcon CT11SB Seam Tape 66' Roll
Login for more information
Fiberglass reinforced for added strength and flexibility. Backed with silicone treated paper. 7-inch tape with 6-inch width of adhesive minimizes seam peaking. Recommended for light to medium residential (contract) traffic. Works well on jute and ActionBac carpets.ORT-8610Orcon K-10 Wide 6" Seam Tape 66' Roll
Login for more information

Showing 101 - 125 of 376 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2022 Professional Flooring Supply.  All rights reserved.