THIS IS THE TEST SITE

Professional Flooring Supply
Your Next Selections: |

Thinsets | Adhesives | Mortars

|

Setting Materials

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
Bostik Big Tile & Stone™ is a polymer-modified, large and heavy tile mortar used for interior or exterior installations to set large format tiles, and can also be used for vertical applications. Big Tile & Stone™ may be used for uneven tile and stone thicknesses; or to minimize lippage. Big Tile & Stone™ white formulation is approved for non-sag applications for tiles up to 12" x 24".30850784Bostik Big Tile & Stone Thinset 50 Lb Modified For Large Tile - White
Login for more information
Bostik D-2001® Ultra-Premium™ is a high performance ceramic tile mastic adhesive for the interior installation of all types of ceramic and stone tile (except moisture sensitive marble), and is ready to use for a fast, professional installation.30850622Bostik D-2001 Ultra Premium Ceramic Tile Mastic - 3.5 Gal
Login for more information
Bostik Ditra-Set Thin Set & Tile Mortar - 50 Lb - Gray30850790Bostik Ditra-Set Thin Set & Tile Mortar - 50 Lb - Gray
Login for more information
Bostik Mud-In-A-Bag is a pre-blended floor mud mixture of 4 parts sand to 1 part Portland cement for use in mortar beds from 3/4" to 4" thick.30850683Bostik Mud In A Bag - 50 Lbs - Gray
Login for more information
Bostik Multi-Purpose Mastic is a high performance adhesive for the interior installation of most types of ceramic and stone tile (except moisture sensitive marble). Bostik Multi-Purpose Mastic is ready to use for a fast, professional installation and provides excellent vertical grab for large bodied tiles. Bostik Multi-Purpose Mastic exceeds the requirements of ANSI A136.1 Type I and II.30850620Bostik Multi-Purpose Floor & Wall Mastic - 3.5 Gal - White
Login for more information
Bostik PM™ Multi-Purpose Polymer-Modified Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimensional stone tiles. Use over properly prepared concrete; structurally-sound, exterior grade plywood (interior/dry use only); cementitious backer board; Bostik Ultra-Set® Advanced, Bostik Black-Top™, Bostik GoldPlus™ and existing, well-bonded vinyl composition tile (VCT) or ceramic tile.30850738Bostik PM Multi-Purpose Polymer-Modified Thin Set Morta - 50 Lb -White
Login for more information
Bostik 915FS is a one-component, smooth fast setting polyurethane sealant/adhesive capable of dynamic joint movement totaling 70% of original joint geometry (35%). The sealant cures to a tough, flexible rubber when exposed to moisture present in the atmosphere. Bostik 915FS has physical properties that will remain relatively stable over time and in varying weather conditions. Its physical properties are relatively unchanged over a wide temperature range, -40F to 150?F (-40C to 66?C).30850786Bostik PM Multi-Purpose Polymer-Modified Thin Set Mortar - 50 Lb -Gray
Login for more information
Bostik Porcelain-Mate™ is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone and dimensional stone tiles. Use over polyethylene uncoupling membranes and fleeced sheet membranes, properly prepared concrete, cement backer board, cured mortar beds, brick, cement block, and Bostik GoldPlus™.30850793Bostik Porcelain Mate Modified Thin Set Mortar 50 Lb - Gray
Login for more information
Professional Grade™ Mastic is a high performance adhesive for the interior installation of most types of ceramic and stone tile (except moisture sensitive marble). Bostik Professional Grade™ Mastic is ready to use for a fast, professional installation and provides excellent vertical grab for large bodied tiles. Bostik Professional Grade™ Mastic exceeds the requirements of ANSI A136.1 Type I.30850621Bostik Professional Grade Ceramic Tile Mastic - 3.5 Gal - White
Login for more information
Bostik Tile-Mate Floor & Wall Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimensional stone tiles. Use over properly prepared concrete; structurally-sound, exterior grade plywood* (interior/dry use only); cementitious backer board; Bostik Ultra-Set Advanced, Bostik Black-Top, Bostik GoldPlus and existing, well-bonded vinyl/VCT or ceramic tile.30850758Bostik Tile-Mate Floor & Wall Thin Set Mortar - 50 lbs - Gray
Login for more information
Bostik Tile-Mate Floor & Wall Thin Set Mortar is for interior or exterior installations to set all types of ceramic, porcelain, granite, slate, marble, limestone, and dimensional stone tiles. Use over properly prepared concrete; structurally-sound, exterior grade plywood* (interior/dry use only); cementitious backer board; Bostik Ultra-Set Advanced, Bostik Black-Top, Bostik GoldPlus and existing, well-bonded vinyl/VCT or ceramic tile.30850736Bostik Tile-Mate Floor & Wall Thin Set Mortar - 50 lbs - White
Login for more information
Healthbond 2399 Ultra Green Tile Adhesive 4 Gal PailHB 2399Healthbond 2399 Ultra Green Tile Adhesive 4 Gal Pail
Login for more information
Powerhold PH-1 Powerbond Thinset Mortar is for use with porcelain and ceramic tiles. Mixed with water, it exceeds ANSI A118.4 and ANSI A118.11 specifications. Use interior and exterior.15030108Powerhold PH-1 Powerbond Thinset Mortar 50 lb. Gray
Login for more information
Powerhold PH-1 Powerbond Thinset Mortar is for use with porcelain and ceramic tiles. Mixed with water, it exceeds ANSI A118.4 and ANSI A118.11 specifications. Use interior and exterior.15030107Powerhold PH-1 Powerbond Thinset Mortar 50 lb. White
Login for more information
Powerhold PH-2 Powerbond LHT Mortar is a one-component, Portland cement based tile mortar designed to set large format ceramic and stone tile firmly in place, without lippage or shrinkage, for interior and exterior floor applications where the embedded thickness is between 3/32"-1/2" (2.4 mm-12 mm). PH-2 Powerbond LHT Mortar may be used for the installation of procelain tile, ceramic tile, quarry tile, non-moisture sensitive natural stone*, cement tile, pavers and high bottom lugged tile. * All natural stone should be tested to be sure discoloration does not occur.15030110Powerhold PH-2 Powerbond LHT Mortar 50 lb. Gray
Login for more information
Powerhold PH-2 Powerbond LHT Mortar is a one-component, Portland cement based tile mortar designed to set large format ceramic and stone tile firmly in place, without lippage or shrinkage, for interior and exterior floor applications where the embedded thickness is between 3/32"-1/2" (2.4 mm-12 mm). PH-2 Powerbond LHT Mortar may be used for the installation of procelain tile, ceramic tile, quarry tile, non-moisture sensitive natural stone*, cement tile, pavers and high bottom lugged tile. * All natural stone should be tested to be sure discoloration does not occur.15030109Powerhold PH-2 Powerbond LHT Mortar 50 lb. White
Login for more information
Powerhold Type 1 Mastic can be used for installing ceramic, porcelain, natural stone, quarry and mosaic tile on interior floors and walls. Recommended for floor applications with tile up to 8" x 8" and wall applications with tile up to 12" x 12". It meets ANSI A136.1 Type I and II specifications, spreads easily, sets quickly, and is easy to clean up.15030111Powerhold Type 1 Mastic 3.5 Gallon
Login for more information
Schluter ALL-SET is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter membranes and boards. Schluter ALL-SET is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter-Systems uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter-Shower System, and KERDI-BOARD. Schluter ALL-SET can be used in both interior and exterior systems and systems and is available in both grey and white.SETA50GSchluter All Set Gray Specialized Modified Mortar
Login for more information
Schluter ALL-SET is a specialized, modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter membranes and boards. Schluter ALL-SET is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter ALL-SET is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter-Systems uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter-Shower System, and KERDI-BOARD. Schluter ALL-SET can be used in both interior and exterior systems and systems and is available in both grey and white.SETA50WSchluter All Set White Specialized Modified Mortar
Login for more information
Schluter FAST-SET is a specialized, fast-setting modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter membranes and boards. Schluter FAST-SET is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter FAST-SET is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter-Systems uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter-Shower System, and KERDI-BOARD. Schluter FAST-SET can be used in both interior and exterior systems and is available in both grey and white.SETF50GSchluter Fast Set Gray Specialized Rapid Set Motar
Login for more information
Schluter FAST-SET is a specialized, fast-setting modified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter membranes and boards. Schluter FAST-SET is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter FAST-SET is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter-Systems uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter-Shower System, and KERDI-BOARD. Schluter FAST-SET can be used in both interior and exterior systems and is available in both grey and white.SETF50WSchluter Fast Set White Specialized Rapid Set Motar
Login for more information
Schluter SET is a premium, unmodified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter membranes and boards. Schluter SET is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter SET is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter-Systems uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter-Shower System, and KERDI-BOARD. Schluter SET can be used in both interior and exterior systems and is available in both gray and white. Meets ANSI A118.1T. Available in gray and white.SET50GSchluter Set Gray Premium Unmodified Mortar
Login for more information
Schluter SET is a premium, unmodified thin-set mortar for use as a bond coat within tile assemblies that is optimized for use with Schluter membranes and boards. Schluter SET is smooth and creamy, as well as easy to handle and spread. It is sag-resistant and ideal for setting tile on both horizontal and vertical surfaces. Schluter SET is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter-Systems uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter-Shower System, and KERDI-BOARD. Schluter SET can be used in both interior and exterior systems and is available in both gray and white. Meets ANSI A118.1T. Available in gray and white.SET50WSchluter Set White Premium Unmodified Motar
Login for more information
The Schluter-SHOWERPROFILE-R is a two part wall transition profile made of brushed stainless steel for covering the exposed wall area where the floor slopes down to a perimeter linear drain. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive. The two-part design of Schluter-SHOWERPROFILE-R can be seamlessly adjusted to any height between 29/32" (23 mm) and 1-25/32" (45 mm) (available in two versions). The profile is available in lengths of 39" (1 m) and 55" (1.4 m) and can be cut to the desired length.SPRA23EB100Schluter Shower Profile - R 29/32 - 1 3/8
Login for more information
The Schluter-SHOWERPROFILE-WS and SHOWERPROFILE-WSK are two-part profiles that form a splashguard at the entrance of curbless showers. The profile is set in conjunction with the tile covering and can be combined with either a semi-circular lip or a collapsible upright lip. Both variants allow for wheelchair accessibility. Choose SHOWERPROFILE-WSK for retrofit applications. Available in anodized aluminum.SPWS19AE100Schluter Shower Profile - WS 5/16" Satin Alum 39"
Login for more information

Showing 1 - 25 of 56 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2022 Professional Flooring Supply.  All rights reserved.