THIS IS THE TEST SITE

Professional Flooring Supply
Your Next Selections: |

Shower Systems & Waterproofing

|

Shop By Brand

Showers & Waterproofing

Showers & Waterproofing

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
DAP Kitchen Bath & Plumbing Silicone Clear 10.8 Oz7079808781DAP Kitchen Bath & Plumbing Silicone Clear 10.8 Oz
Login for more information
DAP Kitchen Bath & Plumbing Silicone White 10.8 Oz7079808770DAP Kitchen Bath & Plumbing Silicone White 10.8 Oz
Login for more information
Gundlach Hot Water Heater2150SSGundlach Hot Water Heater
Login for more information
Gundlach Positive Weep Hole ProtectorPWP-106Gundlach Positive Weep Hole Protector
Login for more information
Pre-Pitch™ is a unique, stay in place screeding tool designed for use underneath shower pan liners. The first product to be installed, Pre-Pitch creates the proper sub floor pitch (1/4" per 12" run) needed to direct water flow towards the weep holes that are an integral part of shower floor drains. By having a pitch under the pan liner, water that passes through the mud bed is now directed to the weep holes instead of being trapped between the mud bed and the liner where many mold and mildew realated issues originate. The Pre-Pitch sticks have holes in their vertical web which helps to act as reinforcment and are easily cut with a hacksaw, PVC cutter or dry diamond blade. For wood subfloors, Pre-Pitch can be screwed or nailed in place. For concrete subfloors, use two sided tape. Subfloor must be level, sound and properly prepared prior to installing Pre-Pitch. Includes instructions, screws, and double sided tape. For standard shower areas with a centered drain or custom shower areas where the drain is within 36" of each wall. For shower areas where the walls are more than 36" (but less than 72") from the floor drain, also use Pre-Pitch Extended Kit. Sticks measure 1/8" to 7/8" taper x 36" long. Sold 6 per package.PPK-201Gundlach Pre Pitch Standard Kit (Sold In Packs Of 6)
Login for more information
Gundlach Pre-Pitch Extended Kit (4/Pkg)PPK-202Gundlach Pre-Pitch Extended Kit (4/Pkg)
Login for more information
For standard 36" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. Included in each package is one each Center Ring and 6 each Standard Float Sticks (1" to 1-3/4" taper x 36" long) that attach in any of the 24 slots on the Center Ring.QPK-101Gundlach Quick Pitch Standard Kit
Login for more information
Schluter-KERDI-SHOWER-CB is a height compensation board made of lightweight expanded polystyrene used to accommodate the drain body and waste pipe height, when installing the Schluter-KERDI-DRAIN-H in conjunction with the Schluter-KERDI-SHOWER -T/TS/TT shower trays. The compensation board can easily be cut to size to fit around the drain and waste pipe, and multiple boards can be used to fit the size and shape of the shower.KSCB906101220Schluter Compensation Board For Horizontal Drain
Login for more information
Schluter-KERDI-BOARD-SC is a lightweight, waterproof, prefabricated shower curb made of KERDI-BOARD that is designed to integrate with the Schluter-Shower System. Designed to integrate with the Schluter-Shower System. Lightweight, stable, and load bearing. Waterproof and ready to tile. Multiple curbs can be installed adjacent to each other for larger showers. Quick and easy to install. Available in three sizes.KBSC1151501220Schluter Curb 48" x 6" x 4 1/2"
Login for more information
Schluter-DESIGNBASE-SL is a finishing profile used as an alternative to baseboards. It features a clean, finished look and is simply attached to the wall area with a suitable adhesive. The profile can be equipped with an optional sealing lip to protect the floor-to-wall transition from moisture and to reduce the transmission of impact sound. The profile is available in anodized aluminum and color-coated aluminum.IDDBSL80AESchluter Design Base Inside Corner 90 Degree Satin
Login for more information
Schluter-DILEX-KSA features a trapezoid-perforated anchoring leg, made of stainless steel or aluminum, which is secured in the mortar bond coat and provides edge protection for adjacent tiles, and a self-adhesive backing strip which can be bonded to fixed building elements (e.g., door and window frames, bathtubs and shower trays, countertops, etc.). The profile isolates the tile covering from the structure and accommodates movement via the 3/8" (10 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSAEGSSchluter Dilex-KSA Replacement Insert Black
Login for more information
Schluter-DILEX-KSA features a trapezoid-perforated anchoring leg, made of stainless steel or aluminum, which is secured in the mortar bond coat and provides edge protection for adjacent tiles, and a self-adhesive backing strip which can be bonded to fixed building elements (e.g., door and window frames, bathtubs and shower trays, countertops, etc.). The profile isolates the tile covering from the structure and accommodates movement via the 3/8" (10 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSAEPGSchluter Dilex-KSA Replacement Insert Cla Grey
Login for more information
Schluter-DILEX-KSA features a trapezoid-perforated anchoring leg, made of stainless steel or aluminum, which is secured in the mortar bond coat and provides edge protection for adjacent tiles, and a self-adhesive backing strip which can be bonded to fixed building elements (e.g., door and window frames, bathtubs and shower trays, countertops, etc.). The profile isolates the tile covering from the structure and accommodates movement via the 3/8" (10 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSAEGSchluter Dilex-KSA Replacement Insert Grey
Login for more information
Schluter-DILEX-KSA features a trapezoid-perforated anchoring leg, made of stainless steel or aluminum, which is secured in the mortar bond coat and provides edge protection for adjacent tiles, and a self-adhesive backing strip which can be bonded to fixed building elements (e.g., door and window frames, bathtubs and shower trays, countertops, etc.). The profile isolates the tile covering from the structure and accommodates movement via the 3/8" (10 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSAEHBSchluter Dilex-KSA Replacement Insert Lt Beige
Login for more information
Schluter-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" (11 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSEGSSchluter Dilex-KSN Replacement Insert Black
Login for more information
Schluter-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" (11 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSEPGSchluter Dilex-KSN Replacement Insert Cla Grey
Login for more information
Schluter-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" (11 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSEGSchluter Dilex-KSN Replacement Insert Grey
Login for more information
Schluter-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" (11 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSEHBSchluter Dilex-KSN Replacement Insert Lt Beige
Login for more information
Schluter-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" (11 mm)-wide, soft thermoplastic rubber movement zone, which also forms the visible surface. The thermoplastic rubber movement zone can be replaced if damaged.KSESPSchluter Dilex-KSN Replacement Insert Sand Pebble
Login for more information
Schluter-DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with floor heating cables to create a warm, luxurious tile floor. Features integrated sound control and thermal break. Reduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction. Reduces heat loss to the substrate for up to 70% faster heat-up times over concrete during temperature increase demands. Nominal 5/16" (8mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings. Self-leveling compounds are not required to encapsulate the cables into the membranes. Available by the roll or by the sheet to accommodate various room sizes. The stud structure of DITRA-HEAT-DUO is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables. Quick and easy to install and few tools are required.DHD810MSchluter Ditra Heat Duo Uncoupling 108' Waterproofing/Sound Control
Login for more information
Schluter-DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control, as well as a thermal break. Optionally, the system can be customized with floor heating cables to create a warm, luxurious tile floor. Features integrated sound control and thermal break. Reduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction. Reduces heat loss to the substrate for up to 70% faster heat-up times over concrete during temperature increase demands. Nominal 5/16" (8mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings. Self-leveling compounds are not required to encapsulate the cables into the membranes. Available by the roll or by the sheet to accommodate various room sizes. The stud structure of DITRA-HEAT-DUO is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables. Quick and easy to install and few tools are required.DHD8MASchluter Ditra Heat Duo Uncoupling 2'7" Waterproofing/Sound Control
Login for more information
K32V2A150Schluter ECK-K Egde Protect 1 9/32" Stainless Steel 4' 11"
Login for more information
VKHK15EBSchluter ECK-KHK Connector Brush Stn Steel
Login for more information
VKHK15ESchluter ECK-KHK Connector Stn Steel
Login for more information
Schluter-KERDI-SHOWER-T/-TS/-TT are prefabricated sloped shower trays with integrated KERDI waterproofing that eliminate the need for a mortar bed. Waterproof and ready to tile. Prevents mold and mildew growth. Features integrated KERDI waterproofing. Quick and easy to install, eliminating the need for a mortar bed. Made of lightweight, expanded polystyrene. Available in thin perimeter heights to simplify construction of curbless showers. Twelve sizes available, including a neo angle configuration and off-center drain for tub replacements. Specifically designed to integrate with KERDI-BOARD-SC shower curbs, KERDI, and KERDI-DRAIN.KST9651525Schluter Kerdi 38"X60" Shower T Tray With Center Drain
Login for more information

Showing 1 - 25 of 399 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2022 Professional Flooring Supply.  All rights reserved.