THIS IS THE TEST SITE

Professional Flooring Supply
Your Next Selections: |

Tile & Stone Substrates | Uncoupling Solutions

|

Shop By Brand

Product Listing

Sort by
Products per page
 Item #ProductAvailability 
UZIN Reinforcing Fibers can be used to improve impact resistance and control shrinkage of any UZIN self-leveling compound when used on demanding substrates.11725Uzin Reinforcing Fibers (Pk)
Login for more information
AS-100 is a premium interior / exterior acrylic primer designed for use with CMP's line of underlayment's and toppings. AS-100 can be used on a wide variety of substrates including concrete, wood, well bonded VCT, Epoxy, Gypsum underlayment, cutback and other adhesive residues not affected by water. AS-100 is quick drying and with a unique ability to bond to both porous and non-porous substrates.30855250CMP AS-100 Premium Acrylic Based Bonding Agent & Primer 5 Gal
Login for more information
AS-100 is a premium interior / exterior acrylic primer designed for use with CMP’s line of underlayment's and toppings. AS-100 can be used on a wide variety of substrates including concrete, wood, well bonded VCT, Epoxy, Gypsum underlayment, cutback and other adhesive residues not affected by water. AS-100 is quick drying and with a unique ability to bond to both porous and non-porous substrates.30619635CMP AS-100 Premium Acrylic Primer Gal
Login for more information
LockDown is a versatile,100% solids, epoxy resin system that can be used as a vapor suppression, broadcast priming and crack repair. LockDown is designed for use over existing concrete where the level of moisture emissions from the slab exceeds the maximum allowed by the manufacturer of the finished floor covering. It also can be used on new projects where schedules do not allow for freshly poured concrete to fully cure. Applied in just one coat at 300 ft² per KIT, LockDown will reduce unlimited MVER or up to 100% RH (per ASTM F-2170) to below 3 lbs. For applications that will receive CMP’s leveling compounds, AS-100 primer is required.30611420CMP Lockdown 100% Solids Vapor Suppression 2.5 Gal
Login for more information
PolyBond is a water based, high solids, acrylic emulsion admixture and adhesion promoter specifically designed for use with CMP Engineered Cements. When exposed to moisture it will not re-emulsify making it ideal for both interior and exterior applications. PolyBond should be used as directed in CMP patching products, underlayments and concrete repair materials to improve the adhesion, tensile and flexural strengths when needed. The modified materials will also derive increased abrasion resistance, increased resistance to moisture, water, freeze / thaw and cracking.30855228CMP PolyBond Latex Admix - 1 Gal
Login for more information
PolyBond is a water based, high solids, acrylic emulsion admixture and adhesion promoter specifically designed for use with CMP Engineered Cements. When exposed to moisture it will not re-emulsify making it ideal for both interior and exterior applications. PolyBond should be used as directed in CMP patching products, underlayments and concrete repair materials to improve the adhesion, tensile and flexural strengths when needed. The modified materials will also derive increased abrasion resistance, increased resistance to moisture, water, freeze / thaw and cracking.30855227CMP PolyBond Latex Admix - 5 Gal
Login for more information
Perma Base 1/2" Concrete 3' x 5'CB3612Perma Base 1/2" Concrete 3' x 5'
Login for more information
PermaBASE UltraBacker® Cement Board features a smooth mesh and mat surface that creates a more rigid and easier to handle product and an improved surface providing superior tile bond. It is ideally suited as an underlayment for ceramic tile on floors, countertops, tub decks, and outdoor kitchen counters.CB 2314Perma Base 1/4" Concrete 3' x 5'
Login for more information
Perma Base 7/16" Concrete 3' x 5'PB 7/16"Perma Base 7/16" Concrete 3' x 5'
Login for more information
0DITRADRAIN10MSchluter Ditra Drain 10 MM 108Sf Thin Bed Drainage Membrane
Login for more information
Schluter-DITRA-HEAT integrates customizable, comfortable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapor management and support to ensure a long lasting installation. Floor Warming-DITRA-HEAT combines the flexibility of loose heating cables with the ease of installation of mat systems. Cables can be placed wherever heat is desired, without creating height differences in the floor. Self-leveling compounds are not required to encapsulate the cables, significantly reducing installation time and effort.Uncoupling-Tile has been successfully installed for thousands of years by incorporating an uncoupling layer, or forgiving shear interface, within the tile assembly. DITRA-HEAT provides uncoupling through its geometric configuration, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. Vapor Management-The free space on the underside of DITRA-HEAT provides a route for excess moisture and vapor to escape from the substrate that could otherwise cause damage to the tile covering above. Thus, DITRA-HEAT effectively manages moisture beneath the tile covering.Support/load distribution-When placed on a solid foundation, columns or pillars can support tremendous loads. The same physical principle applies to DITRA-HEAT installations. Column-like mortar structures are formed in and between the studs on the surface of the matting. Loads are transferred from the tile covering through these column-like mortar structures to the substrate. Since DITRA-HEAT is virtually incompressible within the tile assembly, the advantages of uncoupling are achieved without sacrificing point load distribution capabilities.DH512MSchluter Ditra Heat Uncoupling Water Proofing Memb 3'3" x 41'1" RL
Login for more information
Schluter-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications. Cables snap into the membrane; clips and fasteners are not required. No self-levelers required to encapsulate the cables; installation time significantly reduced. No return to thermostat required. Produces virtually zero electromagnetic fields. 120 V and 240 V options available in a variety of lengths.DHEHK12064Schluter Ditra Heat E HK Heating Cable 212.9 Lf 815W Total Pwr
Login for more information
Schluter-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications. Cables snap into the membrane; clips and fasteners are not required. No self-levelers required to encapsulate the cables; installation time significantly reduced. No return to thermostat required. Produces virtually zero electromagnetic fields. 120 V and 240 V options available in a variety of lengths.DHEHK120102Schluter Ditra Heat E HK Heating Cable 336.9 Lf 1290W Total Pwr
Login for more information
Schluter-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications. Cables snap into the membrane; clips and fasteners are not required. No self-levelers required to encapsulate the cables; installation time significantly reduced. No return to thermostat required. Produces virtually zero electromagnetic fields. 120 V and 240 V options available in a variety of lengths.DHEHK12021Schluter Ditra Heat E HK Heating Cable 70.5 Lf 270W Total Pwr
Login for more information
Schluter-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications. Cables snap into the membrane; clips and fasteners are not required. No self-levelers required to encapsulate the cables; installation time significantly reduced. No return to thermostat required. Produces virtually zero electromagnetic fields. 120 V and 240 V options available in a variety of lengths.DHEHK12027Schluter Ditra Heat E HK Heating Cable 88.2 Lf 338W Total Pwr
Login for more information
DITRA-HEAT-E-RT is a programmable touchscreen thermostat used to control the DITRA-HEAT-E-HK heating cables (either 120 V or 240 V). The thermostat features a 5 mA built-in ground fault circuit interrupter (GFCI) with indicator light and includes a floor temperature sensor. DITRA-HEAT-E-RT is operated via LCD touchscreen controls and features a pre-set schedule for convenience, which may be programmed to fit any schedule. Two heating cables may be connected to the thermostat, up to the total heating load limit of 15 amps. The DITRA-HEAT-E-RR power module may be used in conjunction with the thermostat when the heating load exceeds 15 amps (e.g., in large floor applications) to maintain a single point of control.DHERT102BWSchluter Ditra Heat New Programmable Touch Thermostat Bright White
Login for more information
Schluter-DITRA-HEAT integrates customizable, comfortable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapor management and support to ensure a long lasting installation. Floor Warming-DITRA-HEAT combines the flexibility of loose heating cables with the ease of installation of mat systems. Cables can be placed wherever heat is desired, without creating height differences in the floor. Self-leveling compounds are not required to encapsulate the cables, significantly reducing installation time and effort.Uncoupling-Tile has been successfully installed for thousands of years by incorporating an uncoupling layer, or forgiving shear interface, within the tile assembly. DITRA-HEAT provides uncoupling through its geometric configuration, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. Vapor Management-The free space on the underside of DITRA-HEAT provides a route for excess moisture and vapor to escape from the substrate that could otherwise cause damage to the tile covering above. Thus, DITRA-HEAT effectively manages moisture beneath the tile covering.Support/load distribution-When placed on a solid foundation, columns or pillars can support tremendous loads. The same physical principle applies to DITRA-HEAT installations. Column-like mortar structures are formed in and between the studs on the surface of the matting. Loads are transferred from the tile covering through these column-like mortar structures to the substrate. Since DITRA-HEAT is virtually incompressible within the tile assembly, the advantages of uncoupling are achieved without sacrificing point load distribution capabilities.DH5MASchluter Ditra Heat Sheets Uncoupling Water Proofing Memb 3'3" x 2'7"
Login for more information
Schluter-DITRA and Schluter-DITRA-XL are polyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside. DITRA and DITRA-XL provide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. In conjunction with tile coverings, DITRA and DITRA-XL form an uncoupling, waterproofing, and vapor management layer, while providing support/ load distribution. The combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood/OSB, concrete, gypsum, heated floors, etc.DITRA150Schluter Ditra Uncoupling Membrane 150Sf 1/8"
Login for more information
Schluter-DITRA and Schluter-DITRA-XL are polyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside. DITRA and DITRA-XL provide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. In conjunction with tile coverings, DITRA and DITRA-XL form an uncoupling, waterproofing, and vapor management layer, while providing support/ load distribution. The combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood/OSB, concrete, gypsum, heated floors, etc.DITRAXL175Schluter Ditra Uncoupling Membrane 175Sf 5/16"
Login for more information
Schluter-DITRA and Schluter-DITRA-XL are polyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside. DITRA and DITRA-XL provide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. In conjunction with tile coverings, DITRA and DITRA-XL form an uncoupling, waterproofing, and vapor management layer, while providing support/ load distribution. The combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood/OSB, concrete, gypsum, heated floors, etc.DITRA30MSchluter Ditra Uncoupling Membrane 323 Sf 1/8"
Login for more information
Schluter-DITRA and Schluter-DITRA-XL are polyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside. DITRA and DITRA-XL provide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. In conjunction with tile coverings, DITRA and DITRA-XL form an uncoupling, waterproofing, and vapor management layer, while providing support/ load distribution. The combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood/OSB, concrete, gypsum, heated floors, etc.DITRA5MSchluter Ditra Uncoupling Membrane 54Sf 1/8"
Login for more information
0DITRA30CUTSchluter Ditra Uncoupling Membrane Sold By The Linear Foot
Login for more information
0DITRADRAIN10MSchluter Ditra-Drain Drainage Membrane 3'3" X 33' = 108 Sf
Login for more information
0DITRADRAIN25MSchluter Ditra-Drain Drainage Membrane 3'3" X 82' = 269 Sf
Login for more information
TEC 317 Roll On Crack Isolation Membrane Gal7007705011TEC 317 Roll On Crack Isolation Membrane Gal
Login for more information

Showing 1 - 25 of 36 Results

Resources

About Us

Policies

Contact Us
Store Locator

  • Connect With Us:

FSC Approved

Copyright © 2022 Professional Flooring Supply.  All rights reserved.